Liquid separator for Aluminum extrusion
BAE aluminum extrusion liquid separator is a water-based high temperature resistant release spray. All compo-nents of the product are completely water-soluble, and have very good lubrication effect and high temperature stabil-ity. When used in the aluminum extrusion process, it can effectively prevent aluminum alloy from sticking to extrusion tools under high temperature, improve production efficiency, and at the same time, it will not pollute aluminum prod-ucts and the environment.
category:
BAE aluminum extrusion liquid separator is a water-based high temperature resistant release spray. All compo-nents of the product are completely water-soluble, and have very good lubrication effect and high temperature stabil-ity. When used in the aluminum extrusion process, it can effectively prevent aluminum alloy from sticking to extrusion tools under high temperature, improve production efficiency, and at the same time, it will not pollute aluminum prod-ucts and the environment.
● Water based environmental protection product with plant extract essence, without solvent;
● No smoke or fire during use.
● Good separation effect without damaging the substrate.
● Concentrated solution, can be mixed with water for use, saving costs.
● Use safely and keep the workshop clean..
Technical specifications of Extrusion products
Model | BAE-S20 | BAE-S30 | BAE-S40 |
State | Colorless transparent liquid | Light yellow transparent liquid | Light yellow transparent liquid |
main content | ≥20% | ≥ 30% | ≥ 40% |
PH | 7-8 | 8-9 | 8-9 |
Viscosity (CPS) | 10~20mm²/S | 20~40mm²/S | 30~60mm²/S |
Maximum use temperature | 600 ℃ | 560 ℃ | 560 ℃ |
Recommended products
Online consultation
Demand is the premise of establishing cooperation and the beginning of service. Fill in the demand form immediately and we will get in touch with you in time.