How to use
1. Add the required amount of CA/2 refining agent to the top surface of the molten aluminum in the casting smelting furnace, and then stir, pay attention to the mixing of the refining agent and the molten metal evenly, and use tools to remove the scum produced during the smelting process;
2. Powder spraying machine: Use a powder spraying machine to spray CA/2 refining agent. Using this technology, the refining agent can be evenly mixed into the aluminum water, and the slag removal effect is higher than manual operation.

Advantages:
1. Low calorific value, adding temperature above 650℃;
2. No smoke and dust during the reaction;
3. Less aluminum burning loss;
4. Even heating;
5. Clean furnace;
6. Launder And the downstream equipment is clean;
7. The melt is clean, which can improve the efficiency of the filter plate;
8. It can reduce the harmful substances such as non-metal oxides, sodium and calcium in the melt to an extremely low level.
 
Storage and packaging:
1. Sealed and stored at room temperature to prevent moisture and dust.
2. 25 kg/bag.