Grease is a thick, grease-like semi-solid. It is used in the friction part of the machine to lubricate and seal. Also used on metal surfaces to fill voids and prevent rust. It is mainly composed of mineral oil (or synthetic lubricating oil) and thickener. So how much do you know about its storage? The editor of Best Hot forging boron nitride demoulding grease brings you a brief understanding.
1. Grease is a colloid, and the structure of the grease will be affected by various external factors during use and storage.
2. When storing in the warehouse, the temperature should not be higher than 35 ℃, and the packaging container should be sealed to prevent leakage of moisture and foreign impurities.

3. When the sample or product is taken from the barrel, do not leave holes in the packaging barrel. The grease surface after taking the sample should be smoothed to prevent pits, otherwise the base oil will be squeezed by natural gravity and infiltrate the sample. The pits under it will affect the quality of the product.
The above is the editor of Best Hot forging boron nitride demoulding grease: a brief introduction to the storage knowledge of grease.