Do you know the advantages of Best Foundry Coating dip coating? Let’s take a look at it briefly below!
1. Before the dip coating operation, the coating needs to be stirred reasonably. It is recommended to keep stirring slowly during the dip coating process to prevent air from being involved;
2. When dipping, the direction and position of the lost foam pattern should be selected to be immersed in the coating to prevent the pattern from being deformed;

3. The coating should be uniform, and there should be no whitening phenomenon on the coating;
4. The appearance of the lost foam after dip coating should be prevented from being deformed when it is taken out, transported and placed from the container.
5. After the lost foam pattern is dipped, it should be shaken in time to make the coating uniform and remove the excess lost foam coating.
The above is a brief introduction to the advantages of the Best Foundry Coating dip coating method.