mn

БИДНИЙ ТУХАЙ

It is a high-tech enterprise specializing in the research and development, production, sales and technical services of molten metal high-end auxiliary materials and related equipment. The company has 2 imported boron nitride coating production lines, with an annual shipment exceeding 60 tons, 1 aluminum extrusion lubricating rod production line, with an annual output of more than 50,000; 1 aluminum extrusion release agent production line, with an annual output of more than 5,000 tons ; 1 high-temperature repair agent production line, with an annual output of more than 50 tons; 3 water-based casting coating production lines, with an annual output of more than 300 tons, and the main products have passed ISO9001 certification. The company has more than 20 employees, 70% of whom have a bachelor degree or above. At the same time, it has established close ties with well-known domestic universities such as Central South University and Jiangxi University of Science and Technology. The company has a dedicated R&D team, quality management department, and is equipped with a large-scale laboratory with complete facilities. The professional sales and logistics team can provide customers with round-the-clock meticulous products and technical services. Boronide has always adhered to the concept of being brave in innovation, strict in management, good in quality, and considerate service, and it is our responsibility to provide customers with industry-leading products and services. In the future, the Beneder team will continue to work hard to become a leader in the industry.

илүү ихийг үзэх

БҮТЭЭГДЭХҮҮН

Liquid separator for Aluminum extrusion

Aluminum extrusion liquid release agent is a water-based high temperature resistant release spray. All components of the product are completely water-soluble, and have very good lubricating effect and high temperature stability. It can be used in the aluminum extrusion process to effectively prevent high temperatures. The lower aluminum alloy adheres to the extrusion tool, which improves production efficiency without any pollution to aluminum products and the environment.

илүү ихийг үзэх

МЭДЭЭ

2017 Shanghai lnternational Aluminum lndustry Exhibiton

Specializing in the research and development, production and sales of high-end auxiliary materials and related equipment for molten metal


Do you know what are the precautions for drying in Foundry Coating?

Foundry Coating is a casting auxiliary material that covers the surface of the core during the casting process to improve its surface fire resistance, chemical stability, resistance to metal erosion, and anti-sticky sand; Foundry Coating can be made into paste, paste or Powdery, spray, brush, infiltrate, flow and other methods to coat the surface of the core.


Foundry Coating's recipe knowledge

Paper pulp waste liquid coating is a kind of water-based coating for lost foam coating, which is usually used in the production of small and medium iron castings and aluminum alloy castings, with good overall effect. Need to pay attention to three points during use.


Advantages of Foundry Coating

Foundry Coating is a casting auxiliary material that covers the surface of the core during the casting process to improve its surface fire resistance, chemical stability, resistance to metal erosion, and anti-sticky sand; Foundry Coating can be made into paste, paste or Powdery, spray, brush, infiltrate, flow and other methods to coat the surface of the core.


About Foundry Coating's preparation process

The preparation process of water-based paint is roughly to first add refractory materials, bentonite, anhydrous sodium carbonate and other dry materials to the sand mixer, dry-mix for about 10 minutes, then add the binder solution and a little water, and wet-mix for about 20-30 minutes. , Pour the wet material into the bucket, add appropriate amount of water and stir, and then add various additives during the stirring process.


Best Water based release agent manufacturers talk about the principle of the release agent

The release agent is a functional substance between the mold and the finished product. The release agent is chemically resistant and will not be dissolved when it comes in contact with the chemical components of different resins.


Best Water based release agent manufacturers introduce the precautions for release agents

When using basic fillers, such as calcium carbonate, acidic mold release agents will react with it, causing the viscosity of the mixture to increase, but it will not affect the mold release effect;


Discount Water based release agent introduces the knowledge of release agent

Avoid high temperature, direct sunlight, keep away from fire, strong acid substances, metal oxides, amine substances and flammable materials. It is suitable for storage in a ventilated place at room temperature (recommended below 25°C).


илүү ихийг үзэх